Colourmax Derind is a leading manufacturer of specialty leather chemicals and dyes. They have a production facility near Chennai in the Southern State of India which is very close and well connected to the airport and seaport.
The company was formed in 2004 and currently has a license to produce 42000 M.Tons of Leather Chemicals per annum which is one of the largest in India in its category. Apart from Leather Chemicals, COLOURMAX has exposure in exporting Specialty Dyes and production of Active Pharma Ingredients.
The Factory is situated in 3 Acres and has a built-up area of more than 30000 sq ft with the complete setup to test the raw materials and to test the finish products. The factory has a reactor facility to produce from a Pilot size of 50 Kgs to a Bulk Scale of 10 Tons lot. The Office Complex is situated in Chennai at the heart of Leather Hub with a constructed area of 8000 sq ft.
Products
Fat Liquors
Syntans
- Syntans
- Polymers
- Protein Filling Agents
- Vegetable Extracts
Dyes
Enzymes
Auxiliaries
Finishing
- Lacquers
- Wax Emulsion
- Oils
Leather Chemicals: Fat Liquors
| PRODUCT | TECHNICAL DATA | APPLICATION/PROPERTIES |
| MAXOL C2 | Synthetic Fatliquor | Fatliquor for all types of leathers. |
| Lightweight, Soft, Good Light Fastness | ||
| MAXOL C4 | Semi-Synthetic | General Purpose Fatliquor. |
| Fatliquor | Good softness, Roundness with waxy touch | |
| MAXOL SSPM | Synthetic Sperm Substitute | Fatliquors for all types of leathers. |
| Good Body, Inner touch, Roundness with softness | ||
| MAXOL LNM | Lecithin Fatliquor | Excellent softness with inner lubrication. Good Lightfastness. Best for soft articles. |
| MAXOL LNO | Lanolin Fatliquor | Good Grain Resilence. Avoids Grain Crack. Excellent lubrication. Waxy Feel |
| MAXOL 2935 | Spew Retardant | Inhibits Spew even in sub-zero temperature. Excellent grain lubrication. Improves tensile strength and waxy touch. |
| MAXOL FO | Sulfited Fish Oil | Good grain lubrication with softness. Improves strength. Odourless |
| MAXOL 506 | Ester wax based | Suitable for upper and lining articles. Excellent body with fullness. Avoids looseness |
| MAXOL G6 | Compact Fatliquor | Compact fatliquor for upholstery and uppers. Good softness with body and touch |
| MAXOL RX20 | Synthetic Ester Fatliquor | Fatliquor for soft and light weight leather. Suitable for nappa, garment, shoe suede and upholstery |
| MAXOL CR33 | Synthetic Oils and softeners | Best for light weight and very soft leathers. Good grain lubrication. |
| Best for garment,nappa & gloving. | ||
| MAXOL MB3 | Synthetic Oil with Fatty Alcohol Ester | Excellent softness with inner feel. Good grain lubrication. Best for nappa, garment, gloving and all soft leathers |
| MAXOL CR45 | Synthetic Ester with intermediates | Can be used as single fatliquor for extreme softness. Good Light Fastness. Doesnot load the leather. Produces leather with inner sponginess |
| MAXOL GLH | Sulfo Ester with Aliphatic Hydrocarbons | Multipurpose fatliquor which can be used from pickle to dyeing. Provides |
Leather Chemicals: Syntans
| PRODUCT | TECHNICAL DATA | APPLICATION/PROPERTIES |
| MAXOTAN DI | Phenol Condensate | Provides good body, good fastness, suppleness with tightness |
| MAXOTAN WWS | Phosphonium for wet white | Facilitates chrome free tanning and also wet white tanning with brilliant white shade. |
| MAXOTAN KA | Liquid Sulfone | Avoids defect highlighting. Complete exhaustion of chrome. Excellent body with fullness. Even Dyeing. Produces Very Light Leather |
| MAXOTAN MLS | Liquid Milling Syntan | Provides Uniform Milling effect throughout the Leather along with filling and body. |
| MAXOTAN OS | Phenol Condensate | Good filling, softness and fine grain. Suitable for soft leathers |
| MAXOTAN OS2 | Fortified Phenol Condensate | Good filling, softness and fine grain. Suitable for soft leathers |
| MAXOTAN DCD -FF | Dicyandiamide condensate | Specifically fills the loose portions like shoulder, belly & flanks. Even fullness throughout the leather. Improves buffing properties |
| MAXOTAN 2DCD -FF | Dicyandiamide condensate with fortification | Specifically fills the loose portions like shoulder, belly & flanks. Even fullness throughout the leather. Improves buffing properties. |
| MAXOTAN MLM-FF | Melamine Condensate | Specifically fills the loose portions. Produce soft leather with full handle. Improves buffing properties. |
| MAXOTAN 2MLM-FF | Melamine Condensate with fortification | Specifically fills the loose portions. Produce soft leather with full handle. Improves buffing properties. |
| MAXOTAN DS-ND | Multipurpose syntan | Provides Neutralisation, Even Dyeing, Avoids & remove dye patch, Avoids grain crack. Best for washable and drum dyed articles. Distributes veg tannins evenly. |
| MAXOTAN CKM | Neutralising syntan with In organic buffers | Provides throughout neutralization. Completely neutralizes free acids and prepares leather for tanning |
| MAXOTAN CNS | Phenol derivatives with buffer salts | Provides throughout neutralization. Also possess tanning property and acts as dual syntan. |
| NEUTRALTAN | Organic Salts with Buffers | Neutralising syntan for uppers and goods articles. Provides thorough Neutralisation even in very thick leathers. Avoids Chrome VI formation |
| MAXOTAN NGC | Liquid Neutralising based on aromatic sulfonic acid condensate | Best for soft leathers. Throughout neutralization with complete chrome basification and avoids chrome VI . Completely masks astringency of vegetable tannins. |
| MAXOTAN SWCONC | Phenol Sulfone Condensate | Good filling with fullness and fine grain. Good heat resistance. Accelerates penetration of veg extracts. Best for white leathers |
| MAXOTAN SW | Phenol Sulfone Condensate | Good filling with fullness and fine grain. Improves colour. Accelerates penetration of veg extracts. |
| MAXOTAN SW2 | Phenol Sulfone Condensate with fortification | Good body with tightness and fine grain. Improves colour. Accelerates penetration of veg extracts. |
| MAXOTAN AN | Aromatic syntan | Amphoteric syntan for smooth nappa, nubuck and suedes. Excellent filling and uniform dyeing on both grain and flesh side. |
| MAXOTAN 2AN | Fortified Aromatic syntan | Amphoteric syntan for smooth nappa, nubuck and suedes. Excellent filling and uniform dyeing on both grain and flesh side. |
| MAXOTAN ALM | Aluminium syntan | Best for wet white and chrome free tanning.Provides soft, smooth leather with tight grain. |
| MAXOTAN BS | Bleaching Syntan | Provides light coloured leather. Good for white and pastal shades. |
| MAXOTAN CS | Chrome Syntan | Excellent body with roundness. Provides uniformity inspite of different origin leathers. Good fastness. |
Leather Chemicals: Polymers
| PRODUCT | TECHNICAL DATA | APPLICATION/PROPERTIES |
| MAXOTAN MAP | Polyacrylate | Special Polymer for Garments and soft articles. Good filling and roundness. Does not harden the leather. |
| MAXOTAN MRE | Polyacrytate | Polymer syntan for uppers, nubuck, lining and shoes. Good filling with tightness. |
| MAXOTAN RANF | Amphoteric co-polymer | The multispeciality polymer can be used from Pickling to retanning. Provides throughout filling without looseness. Good chrome exhaustion. Good dye leveling. Avoids chrome VI. Improves penetration of fat liquors and dyes. Improves fullness. Tightness without affecting softness. |
| MAXOTAN MACP | Maleic Anhydride Co-polymer | Most suitable for uppers and tight articles where elasticity should be avoided. |
Leather Chemicals: Protein Filling Agents
| PRODUCT | TECHNICAL DATA | APPLICATION/PROPERTIES |
| MAXOTAN FP | Protein Syntan | Good filling and body. Suitable for all type of soft leathers |
| MAXOTAN PH | Protein Filler | Penetrates the leather through grain side and hence provides uniform grain setting and avoids looseness. |
| MAXOTAN NB | Protein Syntan | Good filling and body. Suitable for all type of upper and upholstery, shoe suede and shoe upper leathers. |
Vegetable Extracts
| PRODUCT | TECHNICAL DATA | APPLICATION/PROPERTIES |
| MAXOTAN GS | Blend of Veg Extracts | Good filling and tightness. Best for light coloured leathers. Used in retanning. Can replace 20% of Mimosa in veg tanning to reduce cost of production. |
| MAXOTAN GJP | Blend of Gambier and Japonica | Good filling and tightness. Used in retanning of veg articles. |
| MAXOTAN WP | Wattle Paste for light coloured EI | Good Filling with pastal colour. Good penetration. Reduces tanning time as penetration is more rapid. |
| MAXOTAN GR1 | Wattle Solid | For all type of burnish and vegetable articles. |
Enzymes
| PRODUCT | TECHNICAL DATA | APPLICATION/PROPERTIES |
| MAXOZYME IA | Submerged Fermented elastin removing enzyme for grain openup and area increase. | Eliminates Back Bone problem. Open up fibres facilitating further tanning. Improves the strength and increases area upto 18% depending upon the origin. Reduces consumption of fatliquors. |
| MAXOZYME TJ | Bating Enzyme | Open up fibres facilitating further tanning. Improves softness and uptake of tanning products. |
| MAXOZYME ACJ | Bating Enzyme | Open up fibres facilitating further tanning. products. Acid Bating enzyme. |
| MAXOZYME AL J | Bating Enzyme | Open up fibres facilitating further tanning. products. Alkali Bating enzyme. |
Auxillaries
| PRODUCT | TECHNICAL DATA | APPLICATION/PROPERTIES |
| AUXOL 115 | Chrome Basifying Agent | Provides maximum exhaustion of chrome in wet blue processing. Provides sustained increase of pH thereby avoids looseness. |
| AUXOL MGO | Chrome Basifying Agent | Provides maximum exhaustion of chrome in wet blue processing. Provides sustained increase of pH thereby avoids looseness. Contains No Buffer Salts. |
| AUXOL 100 | Phosphated Polymer | Reduces water hardness. Improves uptake of fatliquors and auxiliaries. Provides uniform dyeing. |
| AUXOL W | Phosphated Polymer | Reduces water hardness. Improves uptake of fatliquors and auxiliaries. Avoids dye patch. Provides inner feel and softness even in very thick leathers. |
| SURFOX SA | Dispersing Agent | Excellent dispersion action. Improves fatliquor uptake and avoids greasiness. Excellent wet-back during re-chroming. BIO DEGREADABLE |
| SURFOX LXi | Degreasing Agent | Blend of Non-Ionic surfactants. Provides good degreasing of fats. Economical version. |
| SURFOX UF | Degreasing Agent | Removes even the very hard fat from the leather. Best suitable for sheepskins from abnormal high-fat origins. |
Lacquers
| PRODUCT | TECHNICAL DATA | APPLICATION/PROPERTIES |
| MAXOLAC EC | High Shine Dual Lacquer | Dilutable with both water and Butyl Acetate. High Gloss Lacquer. Smooth Touch |
| MAXOLAC MS | Medium Shine Lacquer | Dilutable with water. Provides smooth touch and Medium Gloss. Excellent Rub Fastness. |
| BUTTERLAC SM | Buttery Lacquer | Dilutable with water. Provides silky touch. Excellent Tape test property with rub fastness |
Wax Emulsion
| PRODUCT | TECHNICAL DATA | APPLICATION/PROPERTIES |
| MAXOWAX 80 | Top Coat Season Wax | General Purpose wax emulsion for season coating. Good Plate Releasing property. |
| MAXOWAX SP | Filler Wax | General-purpose wax emulsion with filling effect. Enhances even covering along with resin binders. |
| CRUNCHWAX 56 | Crunch Wax | Water dilutable spray wax emulsion. Provides a Strong Crunch effect even in soft leathers. Good repolishability. |
Oils
| PRODUCT | TECHNICAL DATA | APPLICATION/PROPERTIES |
| MAXOIL 91 | Nubuck Oil | Excellent nubuck effect with darkening with greasy touch. |
| MAXOIL 92 | Nubuck Oil | Excellent nubuck effect with darkening with waxy touch. |
| MAXOIL 93 | Pullup Oil | Good Darkening with pull-up effect. Can be combined with ZSIWAX S56 to achieve the required crunch effect with darkening. Waxy Touch |
COLOURMAX DERIND PRIVATE LIMITED
Regd Office :
18.27TH STREET, SRI SANKARA NAGAR, PAMMAL,
CHENNAI – 600 075. INDIA
PHONE : +91 94449 55687
email: info@colourmax.in
Factory :
Survey No.411. Andavakkam Village, Maduranthakam, TAMILNADU
Leather Technical Service Centre :
1,Adam Street, Nagalkeni,
Chennai – 600 044. INDIA
You may also be interested in this leather chemical manufacturer:
One thought on “Colourmax Derind”