Mishkat Pipe Fittings (MPF) is one of the leading manufacturer of industrial fasteners like stainless steel eye bolts and high integrity special fasteners (e.g. bolts, stud bolts, nuts, washers) and pipe fittings that meet the demands of the clientele for critical applications in hostile environments.
They supply many variations of hot forged head styles for the manufacturing of standard and complete special fasteners and bolts. These include Tee Bolt Round Head, Tee Bolt Square Head, Cheese Head Square, Round Tapered, Tee Square, Tapered Oval, Raised Tapered Oval, Hex Head Bolt, Allen Socket Bolts, Cup Headed, Cup Square, Spill Plate, Heavy Duty Square and Countersunk Square.
Products List
- Flanges
- Fasteners
- Special Fasteners
- Stud Bolts
- Foundation Bolts
- Pipes & Pipe Fittings
FLANGES STAINLESS STEEL EYE BOLTS
A Flange allows two pipes to be mechanically connected together, or a pipe to be mechanically connected to a valve, tee, choke or other piece of equipment. The principle of a flange is to use a mechanical force (exerted by the bolts) to pre – load the gasket sufficiently so that when internal pressure (end cap force) is applied, there is enough contact stress between the flanges and gasket to maintain a seal.
The Flange it self needs to be connected to the pipe. This is usually achieved by welding though threaded and other weldless connections also exist.
Weldneck
These are the most common type of flanges used for high-pressure application.It is designed to transfer stresses concentrations of the base of the flanges. These are recognized by their long tapered hub. The hub provides an important reinforcement to the flange itself and acts to reduce rotation of the flange at bolt up. The smooth transition between flange and the hub combinbed with the strength of the butt weld joint, allows the flanges to be used in extreme conditions of cyclic loading, bendng and temperature fluctuations.
Slip-On
The slip-on flange has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide sufficient strength and prevent leakage. They are ideal for low pressure applications.
Socket Weld
These flanges have a bore and counter bore dimension. The counter bore is slightly larger than the O.D of the matching pipes, allowing pipes, allowing the pipe to be inserted into the flanges. The diameter of the smaller bore is the same as the I.D of the matching pipe. During assembly, the pipe is inserted in the larger diameter bore andis welded in place. This type of flange is often used with high-pressure systems that use smaller diameter pipes. These flanges application is in Chemicals, Hydraulics and Steams plants.
Threaded
The Threaded Flanges is similar to slip-on flanges, but the difference is that the bore is threaded.It can be fitted to the pipe without welding. It is use in low-pressure services at ambient temperatures, and in highly explosive areas where welding creates a hazard.
Lap Joint
The lap joint flange is practically identical to a slip-on flange except it has a larger radius at the intesections of the bore and flange face. It is used with their associated stub end. The stub end is welded to the pipe and the lap joint then works as a backjing ring. The advantage of this flange is that the bolt holes can be aligned with the matching flange after the weld have been completed. This flange is not suitable for areas with thigh external or dynamic loads.
Blind
The Blind flange is a flange without an opening or bore. It is used to close off the ends of a piping systems and/or a pressure vessel opening. They may often be supplied with NPT fittings to allow pressure test connections to be fitted.
Long Weldneck
These Flanges are used primarily as outlets on pressure vessels and tanks. The bore is always the nominal size of the flanges, regardless of the nominal size of the flanges, regardless of the pressure rating, and the standard length is 9 inch or 12 inch.
Orifice
These are used in pairs and meter the flow of liquids and gases through a pipe by clamping an Orifice plate between two flanges. All sizes of orifice flanges are available as WeldNeck, Slip-On and Threaded in 300 pounds pressure and higher.
Reducing Flanges
A Reducing Flanges consists of a flange with one specified diameter having a bore of a different and smaller, diameter. Except for the bore and hub dimensions, the flange will have dimensions of the larger pipe size.
Custom Flanges
They also make custom flanges as per the drawing.
FASTENERS STAINLESS STEEL EYE BOLTS
They are able to supply many variations of hot forged head styles for the manufacture of standard and complete special fasteners and bolts. These include Tee Bolt Round Head, Tee Bolt Square Head, Cheese Head Square, Round Tapered, Tee Square, Tapered Oval, Raised Tapered Oval, Hex Head Bolt, Allen Socket Bolts, Cup Headed, Cup Square, Spill Plate, Heavy Duty Square and Countersunk Square.
Eye Bolts
They manufacture one the most extensive and diverse ranges of Eye Bolts as well as holding supplies of Eyebolt blanks ready for rapid conversion and despatch.
Sizes Ranging from M6 to M100 (1/4” to 4”)
Eye Bolts can be produced in a range of materials including:
- Carbon Steel
- Alloy Steel
- Stainless Steel
- Duplex and other exotics steels
Eyebolts can be supplied with many thread forms such as:
- Left Hand Threads
- Right Hand Threads
- Metric Threads
- Imperial Threads
- ACME Threads
- BSW, BSF, UNC, UNF
are also available.
Various finishes are also available including:
- Electro Plated
- Galvanised
- Sheradised
- Plastic Coated
- Powder Coated
- Painted
- Shot Blast
- Polished
They manufacture many components designed for the installation and maintenance of overhead transmission and distribution power lines.
They specialise in the manufacture of STANDARD AND NON-STANDARD items, producing components to our clients exact specifications.
By using their extensive on-site forging, machining and fabrication processes they are able to minimise the use of sub-contractors and maximise turnaround.
U – Bolt
Size Range : 1/2 througn 36″
Material : Carbon Steel, Alloy Steel & Stainless Steel
Finish : Plain or Galvanized
Service :
Recommended for support, or guide of heavy loads; often Employeed in POWER, PROCESS PLANT AND MARINE SERVICE.
Approvals:
Compiles with Federal Specification A-A-1192A(Type 24), WW-H-282-E(Type 24), ANSI/MSS SP-69 and MSS SP-58(Type 24).
Ordering
Specify pipe size x rod size (e.g., 6×5A) name. U-bolt will be furnished with longer tangents D or with longer threads E id so required and ordered. If hex nuts are not required, specify “without hex nuts”.
Specify name, material specification, dimensions A, B, C, D, and E, and “with hex nuts” or “without hex nuts’!
Note:
The acceptability of galvanized coatings at temperatures above 450° is at the discretion of the end user.
SPECIAL FASTENERS STAINLESS STEEL EYE BOLTS
Products can be produced to customer drawings or the relevant British (BS), American (ASME, ANSI), European (DIN, UNI) or International Standards (ISO).
The size ranges M3 to M64 Metric and 3/16″ to 2.1/2″ Imperial can be supplied. Thread forms include UNC, UNS, UNF, BSW, BSF, Whitworth, Metric, Metric Fine.
Studbolts/Studs/Studding. Studbolts can be supplied in cut lengths and Studding in full bar lengths upto 4 metres long. Din 975, Din 976, BS4882, BS4439, Din 938, ANSI/ASME B16.5. Special machined components, like bobbins or crossbars.
Hexagon Nuts/Lock Nuts/Nyloc Nuts, Din 934, Din 439, Din 985, Din 980, BS3692, BS1769, BS1768, BS1083, ISO 4032.
Socket Capscrews/Socket Countersunk Screws/Socket Setscrews. BS4168, BS2470, Din 912, ANSI/ASME B18.3, ISO 4762.
Hexagon Head Bolts/Sets, BS1769, BS1768, BS1083, DIN 931, DIN 933, ANSI/ASME B18.2.1 Table 2,3,4 & 6, ISO 4014, ISO 4017.
STUD BOLTS STAINLESS STEEL EYE BOLTS
HEAT TREATMENTS
- Annealing
- Case Hardening
- Quenching
- Tempering
COATINGS
- Electro Zinc Galvanizing white /yellow
- Hot dip galvanization
- PTFE Coating Xylan
- Phosphated
- Nickel
- Zinc Nickel
FOUNDATION BOLTS STAINLESS STEEL EYE BOLTS
They provide a wide range of high efficiency FOUNDATION BOLTS for various suppoert structures. Our industrial FOUNDATION BOLTS are manufactured from the superior quality raw materials to assure hign durability. Industrial FOUNDATION BOLTS offered by us are avallable in various dimensions to meet the different demands of the clients We have firmly positioned ourselves as one of the leading FOUNDATION BOLTS manufacturers
Types of foundation bolts
- Hook Bolt
- Right Angle Bend
- Square type Right Angle Bolt
- Round Bend BOLTS
SPECIFICATIONS
- MFG. Standard: IS/ANSI/ASME/DIN
- MATERIAL: Mild Steel, Stainless Steel, Carbon Steel, Alloy Steel.
- SURFACE FINISHING: Phospating, Galvanized, Nickel Plated, Buffing and PTFE Coating.
- THREADING: Metric, BSW, UNC, and as per costumer’s requirement.
- SIZE: Ranging 1/2″ to 4 / 12 mm to 100mm
PIPES STAINLESS STEEL EYE BOLTS
MISHKAT is one of the leading manufacturers of innovative and high-performance pipes in India. Their pipes are made of a variety of high-grade materials such as stainless steel, chrome-moly, and brass/titanium alloys. They have the largest inventory of pipe products – available in all sizes, and they also take customization orders – to ensure premium value, maximum endurance, and excellent customer service.
PIPE FITTINGS STAINLESS STEEL EYE BOLTS
- ELBOW 45° and 90°
- EQUAL and REDEUCING TEE
- CONCENTRIC and ECCENTRIC REDUCER
- END CAP
- UNION
- HALF and FULL COUPLING
- OUTLETS and PLUGS.
Mishkat Pipe Fittings co.,
Head Office
New No. 25, Shop No 16,
Kumbalamman Koil Street,
Tondiarpet,
Chennai – 600081
(044) 2595 7052 / 0187
Unit Office
Shed No. 1B, Door No 25,
Kumbalamman Koil Street,
Tondiarpet,
Chennai – 600081
(044) 2595 7052 / 0187
https://www.mishkatfittings.com/index.html
You may also be interested in this manufacturer of fasteners:
