Neonatal Respiratory Humidifier Manufacturer

nice Neotech, the first Neonatal Respiratory Humidifier Manufacturer in India, offers a heated respiratory humidifier that delivers optimal humidity to medical gases supplied to patients through breathing circuits, endotracheal tubes, or face masks, using temperature-regulated reservoirs. The device operates in both invasive and non-invasive modes, utilizing a servo-controlled feedback system.

nice 8050 Neonatal Respiratory Humidifier Manufacturer

The nice 8050 Respiratory Humidifier is designed for use in hospital environments where medical gas is supplied to patients. Pediatric Respiratory Humidifier Manufacturer
It incorporates the latest technology to provide a physiological level of humidity at body temperature.
The advanced microprocessor controls and delivers precise, reliable performance in humidifying the respiratory medical gas before it is delivered to the patient and ensures 0% water condensation in any breathing circuit.
Capable of operating in either invasive or non-invasive control mode with flow detection.
Features a dual servo control feedback humidifier system that constantly monitors and controls chamber and proximal temperatures in the airway line, resulting in no high temperature gases existing anywhere in the system.
When using a heated wire breathing system from nice 8050, ventilated gas continues to warm during delivery, reducing rain-out and waste, while minimizing the need for circuit change.
Comprehensive audible and visual alarm system constantly protects against potential problems and alerts at variations of set limit temperature vs actual.
Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces the work of breathing.
The design of the nice 8050 Servo Humidifier makes it an ideal humidification system for adult ventilators, infant ventilators, NCPAP, bubble CPAP, infant resuscitators, and high flow oxygen therapy for adult, pediatric, and neonatal care for both invasive and non-invasive applications.
Servo-controlled humidifier accommodates both high and low flow ventilation therapies as well as heated and non-heated wire breathing systems.
An advanced microprocessor controller assures the control of the system, responding immediately to any change in settings, and constant self-diagnostics verify proper operation every second of use.
Compatible for use with both disposable and reusable humidification chambers, and an add water alarm arises when the water level is below the required level in the chamber.
Non-interchangeable connectors with different color code provided for temperature probe and heater wire adapter.
Highly accurate temperature probe that measures the temperature at the chamber side and at the end of the breathing circuit and provides servo-controlled feedback to the humidifier.

CERTIFICATES

Quality Management System (QMS) – ISO 13485
Specific Product – ISO 80601-2-74
Breathing Circuit – ISO 5367
Electrical Safety – IEC 60601-1
Electromagnetic Compatibility (EMC) – IEC 60601-1-2
Biocompatibility – ISO 10993

APPLICATIONS

Respiratory Care: The respiratory humidifier can be used to provide humidification to medical gases delivered to patients via breathing circuits through endotracheal tubes or face masks in respiratory care settings.
Pediatric ICU: The device can be used in the Pediatric Intensive Care Unit (ICU) to provide humidification for critically ill children.
Newborn Emergency Care Unit: The humidifier can be used in the Newborn Emergency Care Unit (NECU) to provide humidification for premature or critically ill newborns.

Neonatal Care Pediatric Respiratory Humidifier Manufacturer

nice Neotech Medical Systems is one of the leading manufacturers of NICU/baby equipment. They provide advanced technology and specialized care for premature and underweight infants in the Neonatal Intensive Care Unit (NICU).

Infant Incubator: An enclosed bed that provides a controlled environment for premature or critically ill infants. Neonatal Respiratory Humidifier Manufacturer
Infant Transport Incubator: A portable version of an infant incubator for transporting critically ill infants between hospitals or between different areas within a hospital.
Infant Radiant Warmer with T-Piece Resuscitator and Phototherapy: A device that provides warmth and phototherapy for premature or critically ill infants, along with a T-piece resuscitator for emergency breathing assistance.
Infant Radiant Warmers: A device that provides warmth for premature or critically ill infants.
LED Phototherapy Manufacturer: A manufacturer of LED-based phototherapy devices for treating jaundice in premature or critically ill infants.
Infant Phototherapy: A treatment that uses light therapy to reduce bilirubin levels in premature or critically ill infants with jaundice. Neonatal Respiratory Humidifier Manufacturer
Bubble CPAP Systems: A device that delivers continuous positive airway pressure to premature or critically ill infants with respiratory distress.
Infant Resuscitator: A device that helps premature or critically ill infants breathe in emergency situations. Neonatal Respiratory Humidifier Manufacturer
Infant T-Piece Resuscitator: A type of infant resuscitator that uses a T-shaped breathing tube to deliver air to the lungs.
Neonatal Transilluminator: A device that uses a light source to examine the abdominal organs of premature or critically ill infants. Neonatal Respiratory Humidifier Manufacturer
Fibre Optic Neonatal Transilluminator: A version of a neonatal transilluminator that uses fiber optics to deliver light to the examination area. Neonatal Respiratory Humidifier Manufacturer
Fibre Optic Blanket Infant Phototherapy: A type of infant phototherapy that uses fiber optics to deliver light to the treatment area. Neonatal Respiratory Humidifier Manufacturer
Infant Observation Trolley: A mobile cart used to transport and monitor premature or critically ill infants in the NICU.
Infant Weighing Scale: A scale designed for accurately weighing premature or critically ill infants.
Infantometer: A device used to measure the length of premature or critically ill infants.
Oxygen Hood: A hood that delivers oxygen to premature or critically ill infants with respiratory distress.
Oxygen Analyser: A device that measures the oxygen concentration in a gas mixture.
Respiration Monitor: A device that measures a patient’s breathing rate and pattern.
Phototherapy-Radiometer: A device that measures the intensity of light emitted by a phototherapy device.
Medical-Air-Compressor: A device that compresses air to a higher pressure for medical use, such as powering pneumatic devices or supplying oxygen to patients.

Respiratory Care

nice Neotech Medical Systems is a leading manufacturer of respiratory care equipment for premature and critically ill infants. They have developed a range of products to address various respiratory disorders such as Respiratory Distress Syndrome, Sleep Apnea of prematurity, Cognitive heart failure, Bronchiolitis and more. Their equipment, such as the heated respiratory humidifier, air oxygen blender, bubble CPAP systems, neonatal infant resuscitator, infant T-piece resuscitator, oxygen analyser, respiration monitor, and high flow oxygen therapy system, are designed to provide specialized care for premature infants with underdeveloped lungs and breathing problems. The company’s commitment to developing innovative and advanced technology to address the specific needs of premature infants in the NICU, makes them a top choice among healthcare professionals.

Heated (Respiratory) Humidifier: A device that humidifies medical gases delivered to patients via breathing circuits through endotracheal tubes or face masks in respiratory care settings.
Air Oxygen Blender: A device that blends oxygen with air to create a specific oxygen concentration for medical use, such as for delivering oxygen to patients with respiratory distress.
Bubble CPAP Systems: A device that delivers continuous positive airway pressure to premature or critically ill infants with respiratory distress.
Neonatal Infant Resuscitator: A device that helps premature or critically ill infants breathe in emergency situations.
Infant T-Piece Resuscitator: A type of infant resuscitator that uses a T-shaped breathing tube to deliver air to the lungs.
Oxygen Analyser: A device that measures the oxygen concentration in a gas mixture.
Respiration Monitor: A device that measures a patient’s breathing rate and pattern.
Medical Air Compressor: A device that compresses air to a higher pressure for medical use, such as powering pneumatic devices or supplying oxygen to patients.
High Flow Oxygen Therapy System: A system that delivers high flow oxygen to patients with respiratory distress.
Breathing Circuits & Patient Interfaces: A breathing circuit is the pathway through which respiratory gases flow to and from a patient. Patient interfaces are the parts of the circuit that come into contact with the patient, such as face masks or endotracheal tubes.
Humidification Chamber: A humidification chamber is a device that is used to add humidity to the air or gases that are being delivered to a patient through a breathing circuit. It typically works by passing the gases through a water-filled chamber, where the gases are cooled and humidified before being delivered to the patient. The humidification chamber is an important component in respiratory care, as it helps to keep the airways moist, which can reduce the risk of complications such as pneumonia and bronchitis. It is commonly used in the neonatal intensive care unit (NICU) for premature infants and other critically ill patients who require respiratory support. Humidification chambers come in both disposable and reusable forms, and are compatible with various types of breathing circuits and patient interfaces.

Disposable Accessories

Breathing circuits: A system of tubes and other components that deliver breathing gases to a patient who is on mechanical ventilation.
Humidification chamber: A device that adds moisture to the breathing gases to prevent dryness of the airways and reduce discomfort for the patient.
High flow therapy nasal cannula: A type of nasal cannula that delivers a high flow of oxygen and air to the patient, often used for patients who have difficulty breathing or are at risk of hypoxemia.
CPAP nasal mask: A mask that covers the nose and delivers a continuous positive airway pressure (CPAP) to the patient, used to treat sleep apnea and other breathing disorders.
CPAP nasal prongs: A type of nasal cannula that delivers a continuous positive airway pressure (CPAP) to the patient, used to treat sleep apnea and other breathing disorders.
Flow tube & fixing pillow: A tube that connects the breathing circuit to the patient’s airway, often secured with a pillow to prevent it from moving during treatment.
Head bonnets with hookable lace & measuring tape: A cap worn by the patient to keep the head steady and in the correct position during treatment, often fitted with a lace to secure the head and a measuring tape to ensure proper fit.
T-piece resuscitator circuit: A type of breathing circuit used for resuscitation, consisting of a T-shaped connector that allows for the delivery of oxygen or air and the removal of carbon dioxide.
Resuscitation face mask: A mask used to deliver oxygen or air to a patient who is not breathing or has stopped breathing.
Test lung: A device used to test the performance of mechanical ventilators and other breathing equipment.
Preset pressure manifold: A device that maintains a constant pressure in the breathing circuit, often used to control the pressure of the gases being delivered to the patient.
Patient interface kit: A set of components used to connect the patient to the breathing circuit, including a mask or nasal cannula.
Phototherapy eye pad: A pad placed over the eyes to protect them from the bright light used in phototherapy treatment.
Skin temperature probe: A device that measures the temperature of the patient’s skin, used to monitor their condition and check for signs of hypothermia.
Respiration sensor: A device that detects and measures the patient’s breathing, used to monitor their respiratory rate and detect any changes in their breathing pattern.

Reusable Accessories

Breathing circuits: A system of tubes and other components that deliver breathing gases to a patient who is on mechanical ventilation.
Humidification chamber: A device that adds moisture to the breathing gases to prevent dryness of the airways and reduce discomfort for the patient.
Bubble generator: A device that creates bubbles in a liquid, often used to create a humidifying mist in a humidification chamber.
T-piece resuscitator circuit: A type of breathing circuit used for resuscitation, consisting of a T-shaped connector that allows for the delivery of oxygen or air and the removal of carbon dioxide.
Skin temperature probe: A device that measures the temperature of the patient’s skin, used to monitor their condition and check for signs of hypothermia.
Air temperature probe: A device that measures the temperature of the air in the patient’s environment, used to ensure the patient is kept at a comfortable temperature.
Humidifier temperature probe: A device that measures the temperature of the humidifying liquid in a humidification chamber, used to ensure it is at the correct temperature for the patient.
Heater wire adapter for humidifier: A device that connects the humidifying liquid in a humidification chamber to a heating element, used to keep the liquid at the correct temperature for the patient.
Transport incubator trolley: A trolley or cart that can be used to move an incubator and its patient from one location to another.
Baby mattress: A mattress that is placed inside the incubator and is used to provide comfort and support for the patient.
Incubator hood (canopy) accessories: Additional parts that can be added to the hood or canopy of an incubator, such as lights or monitoring equipment.
Air intake filter: A filter that removes impurities from the air entering the patient’s environment, used to ensure the air is clean and safe for the patient to breathe.
Humidifier bottle, suction bottle, venturi slow suction: Various bottles or containers that are used to hold liquids for the humidification chamber or suction equipment.
Air & oxygen pressure & flow regulator: A device that controls the pressure and flow of gases entering the patient’s environment, used to ensure the patient receives the correct amount of gases.
Air & oxygen inlet hose: A hose that connects the patient’s environment to the source of gases, used to deliver oxygen or air to the patient.
Flow meters: A device that measures the flow of gases entering the patient’s environment, used to monitor the amount of gases the patient is receiving.
Oxygen cylinder: A container that stores oxygen gas under pressure, used as a source of oxygen for the patient.
Patient circuit arm & mounting brackets: A support arm and brackets that hold the patient’s breathing circuit in place, used to keep the circuit stable and prevent it from moving during treatment.
X-ray tray: A tray that is placed under the patient during an X-ray, used to protect the patient and the X-ray equipment from any liquids or other materials that might be present.
Oxygen sensor: A device that detects the presence and concentration of oxygen in the patient’s environment, used to monitor the patient’s oxygen levels.
Optical sensor assembly with cable for phototherapy radiometer: A sensor that measures the intensity of light used in phototherapy treatment, used to ensure the patient receives the correct amount of light.
Fibre optic cables: Cables that are used to transmit light or other signals, often used in medical equipment such as phototherapy units.
Acrylic trays: Trays that are made of acrylic, often used to hold medical equipment or supplies. They are lightweight and easy to clean, also it can be sterilized.
Roll stand assembly: A stand that has wheels or casters, used to move medical equipment such as an oxygen cylinder or IV pole around easily. It allows for mobility and flexibility in positioning of the equipment. Pediatric Respiratory Humidifier Manufacturer
Battery backup: A device that provides an emergency power source in case of a power outage, used to ensure the patient’s medical equipment continues to function during a power failure. It is crucial in ensuring patient safety and continuity of care during power outages or other unexpected interruptions. Pediatric Respiratory Humidifier Manufacturer
IV poles: A pole or stand that holds an IV bag or other medical equipment above the patient, used to keep the equipment at the correct height and within easy reach of the healthcare provider. It helps to reduce clutter and free up space on the patient’s bedside table, also it allows for easy access and adjustment of the IV fluids. Pediatric Respiratory Humidifier Manufacturer