Thiruppathy Enterprises

Manufacturer of corrugated boxes/rolls and export cartons. Their portfolio also includes office files and food carton boxes and boxes for various industries.

Factory

Thiruppathy Enterprises Manufacturer of corrugated boxes
Mr. K. Senthilselvan
No: 22, 2nd Cross Street, Anbu Nagar,
(Devendran Nagar)
Keelkattalai,
Chennai 600 117.
Tamilnadu, INDIA

+91 94445 83386

thiruppathyenterprises1328@gmail.com

Corrugated box design

The most common box style is the Regular Slotted Container (RSC). All flaps are the same length from score to edge. Typically the major flaps meet in the middle and the minor flaps do not, unless the width is equal to the length. Box styles in Europe are typically specified by a 4-digit code provided by the European Federation of Corrugated Board Manufacturers (FEFCO): A regular slotted container is coded 0201.[8]

Regular Slotted Container

Box blank for a regular slotted container showing score lines, slots, and manufacturer’s joint
The manufacturer’s joint is most often joined with adhesive but may also be taped or stitched. The box is shipped flat (knocked down) to the packager who sets up the box, fills it, and closes it for shipment. Box closure may be by tape, adhesive, staples, strapping, etc.

Many other styles of corrugated boxes and structures are available:

FOL (Full Overlap): A Full Overlap Box is similar to an RSC except the major flaps fully overlap. Full-overlap flaps provide extra stacking strength and edge protection.
HSC (Half Slotted Container): Half-Slotted Containers (HSC) are similar to an RSC, but with only one set of flaps. They are useful when an open-top container is desired. HSCs can be used to create a telescope box.
A Full Telescope Box has two fully telescoping sections. The sections may be formed by staples, die-cut locks, adhesive, etc.
A Partial Telescope Box has two sections. The top telescopes partially over the bottom. Commonly used for holding printing paper.
A corrugated tray is often used for display purposes or used with a shrink wrap
Corrugated corner pads can be used for product support and cushioning
Special die-cut shapes have almost endless designs and uses.
etc.
The size of a box can be measured for either internal (for product fit) or external (for handling machinery or palletizing) dimensions. Boxes are usually specified and ordered by the internal dimensions.

https://en.wikipedia.org/wiki/Corrugated_box_design