Established in 1999, Balakrishna Engineering, an ISO 9001:2015 certified company is one of the largest manufacturer of construction equipment in Coimbatore.
Their products come with different specifications:
Suspended Platform Hoist
This machine is used outer plastering, painting, fixing etc without scaffolding.
Concrete Mixer Machine
Mixer machines are used for mixing of concrete mixers.
Mini Winch
It is used for lifting the bricks, Sand, Cement etc to the top floors.
Ladder Lift
It is a slope type lift which is used by ladder for pouring the concrete on top floors.
Builder Hoist
This is a straight lift with a platform to shift the materials form one floor to other.
Multi Mixer
It is used for mixing and shifting the concrete. Both works is one drive.
Column Box Concrete Lift
This is a special lift machine used only for concrete box filling.
CNC Automatic Stirrup Bending Machine
It is a fully automatic strriup bending machine for Steel bars.
Steel Bar Tmt Cutting Machine
This is a semi automatic cutting machine.
Portable Rebar Cutter
This is a portable cutting machine which works electrically.
Steel Bar Tmt Bending Machine
This is a semi automatic bending machine.
Steel Bar Straight Cutter
This machine is used for straighting the steel bars and cutting.
Portable Rebar Tier
This is used for tie the nots for pillar with works in battery.
Steel Bar Thread Roller
It is used for threading the steel bars.
Vibratory Roller
This one is used for levelling the surface used with Honda engine.
Tamping Rammer
It is used for footing and PCC purpose.
Earth Rammer
Used for compacting the soil and levels the floor.
Vibratory Screed
This one is for levelling the concrete on floors.
Power Trowel
It is used for finishing the floor.
Concrete Cutter
It is used for cut the concrete floors.
New Type Electric Road Groove Cutter
This is used for concrete cutting and Chipping electrical type.
Hollow Block Making Machine
This machine is for making Concrete Blocks.
Reversible Mixer Machine
This machine is used for mixing of concrete.
Vibrator Needle
It is used for vibrating the concrete like columns, pillars etc.
Sand Siever
This one is for filtering the sand.
Wheel Barrow
This is used for shifting the materials for one place to other.
Adjustor Span
This is used for centering purpose.
Adjustor Props
This is used for centering purpose.
Floor Forms Centering Sheet
This is used for centering purpose.
Cuplock System & Scaffolding
This one is for supporting purpose.
Tubular Scaffolding
This one is for supporting purpose.
Cube Testing Machine
This is used for testing the concrete cubes.
Earth Auger
This one is used for making holes in ground.
Cube Mould
This is for testing purpose.
Slump Cone
This one is used for testing purpose.
Swivel Coupler
It is used to tight the scaffolding pipes, Go Go nut, Joint pin, Tie rod, C Clamp, Uhead, Go go jockey, Jick and saw. These all are used for centering purpose.
Go Go Nut
This is used for centering purpose.
Joint Pin
This is used for centering purpose.
Measuring Box
This one is for measure the items during construction.
Toe Rod, Wing Nut, Anchor Nut
This is used for centering purpose.
C-Clamp
This is used for centering purpose.
U-Head
This is used for centering purpose.
Wall Plastering Spary Gun
It is for plastering the wall.
Go Go Jockey
This is used for centering purpose.
Jick & Saw
This is used for centering purpose.
Balakrishna Engineering Largest Manufacturer of Construction Equipment
No.8A, Near DAR Kalyana Mandapam,
Avinashi Road,
RG Pudur, Chinniampalayam,
Coimbatore – 641 062
+91 – 0422 – 2627005
+91 – 9443356146, +91 – 9842204043
mix.bke@gmail.com
You may also be interested in this manufacturer of construction equipment:
2 thoughts on “Balakrishna Engineering”