Established in 1996 at Chennai, the gateway of South India FCS Fluoro Carbon Seals has scaled newer heights in manufacturing and supplying of Industrial Seals/hydraulic seals over the years. Since establishment, FCS Fluoro Carbon Seals has been at the forefront and pioneering in the manufacture of PTFE(Teflon), RTFE, Modified PTFE (TFM & NXT), VICTREX® PEEK, VESPEL, PFA, Nylon, MOS2 Devlon, HNBR, (VITON) FKM, FFKM, EPDM, DELRIN (POM), PU and other advanced polymers components as per customers’ requirement in India.
Product Range
They are specialist in manufacturing and maintaining superior quality…
- Hydraulic & Pneumatic Seals
- O-rings
- High-Pressure piston seals
- Seal kit for heavy earth moving equipment
- Seals and Seats for valves
- Seals for Pumps
PTFE VALVE SEATS & COMPONENTS hydraulic seals
Exceptional chemical & thermal resistance, low permeability, reduced deformation under load, High creep resistance & dimensional stability, exceptionally smooth surfaces.
- Modified PTFE
- Glass Filled, Bronze Filled,
- Carbon Filled, Graphite Filled,
- Moly Filled & Specified by Customers
PFA hydraulic seals
Main Characteristics of PFA
- Very high service temperature
- Excellent chemical and heat resistance
- Very high toughness and impact strength
- Excellent weatherability and release properties
- Very good electrical insulating and dielectrical properties
- Excellent stress crack resistance
- Low Co-efficient friction
- Smooth surface
PEEK hydraulic seals
VICTREX PEEK ® 450G – Virgin
- Excellent strength, stiffness and dimensional stability temperature and harsh environment.
- Easy to process and lightweight compared to steel, aluminum and titanium.
- Low co-efficient of friction and high wear resistance without lubrication.
- Chemical resistance and insoluble in common solvents including acids, salts and oil.
- Features low out gassing, low particle generation and inherent purity for reduced contamination.
PEEK® TUBE MANUFACTURING RANGE
DIA – FROM 25 TO 1000mm
VICTREX PEEK® GRADES
450CA30, 450FC30, 450FE20, 450FG30, 450GL30
Applications
BUSHINGS, THRUST WASHERS, BEARING CAGES, GASKETS, SEAL, RINGS,
VALVE SEALS & SEATS, TRANSMISSION COMPONENTS
PCTFE hydraulic seals
PolyChloroTriFluoroEthylene is a fluorocarbon-based polymer and is commonly abbreviated PCTFE. PCTFE offers the unique combination of physical and mechanical properties, nonflammability, chemical resistance, near zero moisture absorption, and excellent electrical properties. These characteristics cannot be found in any other thermoplastic fluoropolymer with a useful temperature range of -400A°F to +400A°F (-240A°C to +204A°C).
APPLICATIONS
- Cryogenic applications — super-cold refrigeration components
- Valves — seats, stems, seals (Butterfly Valves for cryogenic applications were developed for large pipes which are used to transport cryogenic fluids. They are mainly used in storage and transport bases of liquefied natural gas or in its transport ship).
- Seals for lip seals with spring energizer, o-rings, v-rings, special construction seals
- Compressors & pumps
- Gaskets — pressure, diaphragm, liquid gauge seals, fluid handling
- Bearings — sleeve & thrust
- Stock shapes — for machining components
METAL SEATS (Inconel,SS316,SS304 & etc.)
Range of Valve Seats Upto 24″
Inserts Material
PEEK®, PTFE, Devlon, Nylapron and other specified material by customer.
ENERGIZED LIP SEAL hydraulic seals
A spring Energized seal is a circumferential band of polymer material energized by a metal spring energizer. The cross section of the Spring Energized seal configuration can be a variety of symmetrical or asymmetrical shapes and these can be manufactured in different sizes.
Spring Energized seals are normally comprised of a machined polymer material body (or jacket), containing a spring energizer. The polymer most commonly used in PTFE, as this provides excellent characteristics in terms of high and low temperature capability, low friction, long life, and wide chemical resistance. Other materials can be used for the seal jacket according to the application requirements.
The three main types of springs
- Cantilever/V spring (Good dynamic performance, medium to high deflection, medium spring force)
- Helical spring (Good static performance, high spring force, low deflection)
- Wire/Coil Spring (Good dynamic performance, high deflection, low/medium spring force and easier for installation purposes).
Hydraulic Seals
- Wipers
- Rod Seals
- Piston Seals
- Symmetrical Seals
- Back-up Rings
- Guide Rings
- Rotary Seals
- Static Seals & O-rings
- Customised Seals and Machined Parts
- Mining Seals
Rubber O-rings hydraulic seals
- FFKM
- Viton (FKM)
- HNBR
- EPDM
- NBR
CHEVRON PACKING hydraulic seals
Chevron packing is used for hydraulic, pneumatic cylinder, higher pressure pumps and Valve Stem Packing.
- PTFE
- PEEK®
- Modified (TFM) PTFE
DEVLON V-API
- Increases component life
- Extends life of mating parts
- Is cost effective
- Does not require special fitting tools
- Is lightweight and easy handling
Typical Applications
Valve seat inserts, Clamps, Bundle spacers, Rollers, Bearings
DUPONT VESPEL hydraulic seals
Attributes
- Low coefficient of friction
- Wide range of temperature capabilities upto 500 º F/280 º C and above
- High mechanical strength
Application
Thrust washers, Seal rings, Valve seats, Bearings, Seals
FCS Fluoro Carbon Seals Pvt Ltd
Contact Person:
G. M. Samy-9382180773, 9003156569
G.Devaraj – 9444234462
Registered Office / Corporate Office:
3/178, Old Mahabalipuram Road,
Thuraipakkam, Chennai,
Tamil Nadu, India.
Pincode: 600097
91-44-24580888, 24580666, 64626201 / 02
91-44-24580707
fcs@fluorocarbonseals.net
info@fluorocarbonseals.net
http://www.fluorocarbonseals.com/index.html
You may also be interested in this manufacturer:
One thought on “FCS Fluro Carbon Seals”