Aqua Group provides complete solar water pump which include solar PV panels (with mounting structures), VFD drives, and solar pumps. With AQUA GROUP’s solar pumping systems, farming is no longer restricted to areas connected to the power grid. Farmers can now harness the sun’s energy to pump water anywhere. AQUATEX Solar Pumps are designed to start early in the morning and work till late in the evening ensuring maximum discharge per day.
SOLAR PV WATER PUMPING SYSTEMS
Product Description
“AQUATEX” Solar Pumping Systems are energy efficient, easy to install, and require minimum maintenance. These systems are ideal when grid electricity is not available. These systems are MNRE certified.
Product/Operating Range
- Photovoltaic Array
- Pump Set (Surface or submersible)
- Suitable Electronics for starting
- Inverter for A.C. Motors (VFD)
- Suitable mounting structure
| PARTICULARS | DETAILS |
| Power Range | 0.5 to 30.0 HP |
| Voltage Range | 380V- 440V, AC Three phase , 50Hz |
| Voltage Range | 80V, 110V, 155V, 220V, 320V AC Three phase , 50Hz |
| Head | Maximum 250 M |
| Discharge | Maximum 1600 LPM |
Application
- Water extraction from all size of bores, open-wells
- Irrigation systems for Agriculture including Drip and Sprinkler systems.
- Pressure boosting applications
- Domestic water supply to large residences and multi storied apartments
- Water supply to commercial establishments like Hotels, Lodges and Hospitals
- Dewatering of mines
- Industrial water supply
Features/MOC
PHOTOVOLTAIC ARRAY
- High Efficiency PV modules with IEC standards
- Multiple configurations – 72, 60 and 36 cells
- Wide power range – from 240 W to 325 W
- Enhanced low light performance
- Minimum moisture ingress for greater logivity of the modules
- Top rated highly classified bins of solar cells
- Selection of best quality of materials and matching of components for harvesting more power
- High anodised Aluminium frame
- High reliability in extreme weather conditions
PUMPSETS
- All Pumps and Motors are suitably modified to operate with the variable speed drives
- All pumps are designed for higher discharge ouput per day by early starting and Late stop characteristics
- * Refer the corresponding Pumpset for further Details
INVERTER FOR A.C. MOTORS (VFD)
- Operates without grid directly from photovoltaic (PV) cells
- Automatic start and stop with solar radiation
- Built-in maximum power point tracking (MPPT)
- Easy installation and set-up
- Compatible with all pump types
- Compact and uniform drive module design (IP20)
- Dual supply capability with change over switch – solar and grid compatible
- Sensorless vector control
- Remote Monitoring
- Housed in a IP54 protection
MOUNTING STRUCTURES
- Hot dip galvanized iron with 80-100 micron thickness
- High reliability in extreme weather conditions
- Withstood high wind loads and wind velocities
SOLAR SUBMERSIBLE PUMPSETS (AC) (SOLAR WATER PUMP)
Product Description
“TEXMO” SOLAR SUBMERSIBLE PUMPSETS are easy to install, noise free, efficient and require minimum maintenance. A wide range of pumps are available to meet solar pumping requirements and MNRE standards. Motors are water lubricated and feature robust thrust bearings. Good quality materials are used to obtain a reliable life and provide maintenance free service.
Product/Operating Range
| PARTICULARS | DETAILS |
| Bore size min. | 3”,4″,5″,6″,7″ & 8″ |
| Power Range | 0.5 to 30.0 HP |
| Voltage Range | 340V- 440V, AC Three phase , 50Hz |
| Voltage Range | 80V,110V,155V,220V & 320V AC Three phase , 50Hz |
| Speed | 2900 RPM |
| Motor Type | Water filled and water cooled Induction motor |
| Coupling | Key ( Upto 25 HP) / NEMA |
| Head | Maximum 250 M |
| Discharge | Maximum 1600 LPM |
| No of Stages | Maximum 60 |
| Liquid temperature | Maximum 33ºC |
| Operating Pressure | 50 bar |
| Sand content in water | 50 PPM Max. |
| Pump Models | SOL-XXX |
| Motor Models | SOL-XXX |
Application
- Water extraction from all size of bores
- Irrigation systems for Agriculture including Drip and Sprinkler systems.
- Pressure boosting applications
- Domestic water supply to large residences and multi storied apartments
- Water supply to commercial establishments like Hotels, Lodges and Hospitals
- Dewatering of mines
- Industrial water supply
Features/MOC
- All Pumps and Motors are suitably modified to operate with the variable speed drives
- All pumps are designed for higher discharge ouput per day by early starting and Late stop characteristics
- * Refer the corresponding Submersible Pumpset for further Details
SOLAR SURFACE MONOBLOCKS (AC)
Product Description
AQUAGROUP’S “AQUATEX” Solar Power Operated Monoblock pumps are rugged, reliable and are built to withstand tough conditions and high suction lifts. A very wide range of monoblocks to suit a variety of operating points are available.
Product / Operating Range
| PARTICULARS | DETAILS |
| Power Range | 1.5 to 30.0 HP |
| Voltage Range | 340V- 440V, 50Hz, Three phase AC Power supply |
| Class of Insulation | ‘A’ Class – 1.5 HP to 30 HP |
| B’ Class – 3 HP to 20 HP | |
| Speed (rpm) | 2900 |
| Motor Type | Squirrel Cage Induction motor (TEFC Type) in Rugged Cast iron construction |
| Head | Maximum 95 m |
| Discharge | Maximum 2600 lpm |
| Liquid temperature | Maximum 33ºC |
| Operating Pressure | Maximum 20 bar |
| Optional (Sealing) | Carbon Vs Ceramic Mechanical seal / bronze impeller provided on request |
Application
- Deep or shallow open well pumping with suction lift
- River and canal lift irrigation pumping
- Sprinkler and drip Irrigation systems
- Filter point pumping
- Industrial water supply and transfer
- Cooling water circulating systems
- Pressure boosting systems
Features / MOC
- All Pumps and Motors are suitably modified to operate with the variable speed drives
- All pumps are designed for higher discharge ouput per day by early starting and Late stop characteristics
| PARTICULARS | DETAILS |
| Motor Body | Cast Iron (FG 200) |
| Bearings | Heavy Duty Deep groove ball bearings |
| Rotor shaft | Carbon steel shaft (Optional – SS) |
| Shaft Sleeve | Stainless Steel (AISI 410) |
| Cooling fan | Aluminum / Cast iron (FG 200) |
| Water cutting ring | Nitrile Rubber |
| Cooling fan cover | Cast Iron (FG 200) |
| Eye bolts | Forged steel |
| Casing | Cast Iron (FG 200) |
| Yoke | Cast Iron (FG 200) |
| Impeller | Cast Iron (FG 200) (Optional – Bronze) |
| Sealing arrangements | Packing rope with GlandOptional : Packing rope with Gland & Double lip sealOptional : Mechanical seal |
SOLAR OPENWELL PUMPSETS (AC) (SOLAR WATER PUMP)
Product Description
AQUAGROUP’S “AQUATEX” SOLAR POWER OPERATED OPENWELL SUBMERSIBLE PUMPSETS offer the convenience of not having to change the position of the pump with changing water levels in the well. They are rugged and efficient. They are reliable and are built to withstand tough operating conditions.
Product / Operating Range
| PARTICULARS | DETAILS |
| Power Range | 3.0 to 30.0 HP |
| Voltage Range | 340V- 440V, AC Three phase , 50Hz |
| Speed (rpm) | 2900 |
| Motor Type | Water-filled and water cooled Induction motor |
| Head | Maximum 90 m |
| Discharge | Maximum 2640 lpm |
| Liquid temperature | Maximum 33ºC |
| Operating Pressure | 80 bar |
| Sand content | maximum ,50 PPM |
Application
- Deep or shallow openwell pumping with suction lift
- River and canal lift irrigation pumping
- Pressure boosting applications.
- Public water supply to large residence areas and multi storied apartments
- Water supply to commercial establishments like Hotels, Lodges and Hospitals etc
- Dewatering of mines
- Industrial water supply and transfer
- Fountains
Features / MOC
- Energy efficient motor
- Low operating cost
- Rigid cast iron motor frame, impeller and volute casing
- Three phase water-filled submersible induction motor with easily rewindable stator suitable for solar power operation
- All Pumps and Motors are suitably modified to operate with the variable speed drives
- All pumps are designed for higher discharge ouput per day by early starting and Late stop characteristics
| PARTICULARS | DETAILS |
| MOTOR | Water-filled Squirrel cage Induction motor |
| Stator Frame | Cast Iron (FG 200) |
| Thrust Bearing | Carbon with SS Thrust pad |
| Journal Bearings | Phosphor Bronze / Carbon |
| Diaphragm | Nitryle Rubber |
| Shaft | Stainless steel shaft with integral sleeve /Carbon Steel shaft with SS sleeve |
| Strainers | Stainless steel |
| Discharge casing | Cast Iron (FG 200) |
| Suction bracket | Cast Iron (FG 200) |
| Impeller | Cast Iron (FG 200) (Optional – Bronze) |
AQUA GROUP
Manufacturer of Solar Water Pump Systems
Thudiyalur (post)
Coimbatore – 641 034.
Tamilnadu, India
+91 422-2642484
+91 0422-2642128
enquiry@aquagroup.in
marketing@aquagroup.in
https://www.aquagroup.in/category/products/solar-pumps/
You may also be interested in this submersible pump manufacturer:
One thought on “Aqua Group”