Ganges Internationale Pvt. Ltd. (GIPL) is the steel fabrication and galvanizing division of the Ganges Group and a leading Telecom Tower manufacturer along with Transmission Line Towers & Solar Module Mounting Solutions.
Business Divisions
Telecom towers
- Ground Based Tower
- Roof Top Towers
- Special Structures
- Telecom Accessories
Transmission line towers
Hot Dip Galvanizing
Crash Barrier
TELECOM TOWERS
Ground Based Tower Telecom Tower Manufacturer
Structural designs are made according to the most recent American & European (TIA, EN) standards. Design Code: ANSI / TIA 222-G. Designs according to other standards are also available upon request.
Tubular Tower Telecom Tower Manufacturer
Full Scale Tower Destructive Test
The Ramboll Tubular Tower has been tested for different wind loads on physical test bed and all load cases test status was successful. After successful completion of all test cases with 100% of the ultimate load, the loading was continued beyond 100% of ultimate load. Tower withstood up to 190% of loadings with a waiting period of two minutes.
The Tubular – Quantitative Advantage!
- Cost Savings on account of Foundation Volume being lower by 15% to 25% compared to Angular tower.
- Erection cost is lower since the tower weight is lesser
- Erection time taken is lower
- Equipment platform can be in built as part of the Tubular tower leading to cost savings
- In India – 80% of Towers are Tubular type. [ATC, Reliance and Infratel have all standardized on same
- Easy Identification & segregation in tubular because of lesser parts & sections
Angular Tower Telecom Tower Manufacturer
The Classic Ramboll Angle Bar Tower
- Legs and bracing in angle bars
- No secondary bracings
- Few elements
- Low weight
- Easy production
- Easy transport
- Well proven principals and global experience
- Custom made to the client’s capacity and needs
Angular Tower Technical Specifications
- THE TRIANGULAR 90o ANGLE BAR TOWER A NEW INNOVATIVE RAMBOLL DESIGN
- One leg vertical the two other inclined
- Two faces identical – “back” face staggered bracing
- Vertical very light ladder with identical sections
- Lower weight than “traditional” 3-legged angle bar towers
- Special design compared with other lattice towers
- Custom made and optimised to the client’s capacity and needs
Roof Top Towers Telecom Tower Manufacturer
Features
- Lattice configuration
- 4-Legged structure
- Leg and bracing consist of pipe or angular section
- The base width of minimum dimension since the structure is roof mounted
- The base of the tower is mounted on concrete or steel frame (consists of I-beams or inverted I-beams) with the frame fixed on the rooftop existing concrete columns/pedestals
- Macro coverage requirements
Specifications
| Height Range | 12m-20m |
| Number of Tenants | 3 Tenants |
ROOFTOP POLE/ UNIPOLE Telecom Tower Manufacturer
Features
- Pipes in circular or multisided configuration with minimum thickness of 4mm
- Flange joint or slip in joint assembly
- Slim design
- Single roof mounted poles fixed with steel dowels drilled into the roof
- Coverage in urban areas
Specifications
| Height Range | 6m-12m |
| Number of Tenants | 2 Tenants |
ROOFTOP MAST/ MINIMAST Telecom Tower Manufacturer
Features
- Lattice configuration
- 3 Legged or 4 Legged structures
- Leg and bracing consist of pipe (CHS) or angular section
- The base width of minimum dimension since the structure is roof mounted
- The base of the tower is mounted on concrete or steel frame (consists of I-beams or inverted I-beams) with the frame fixed on the rooftop existing concrete columns/pedestals
- Macro coverage requirements
Specifications
| Height Range | 6m-15m |
| Number of Tenants | 2 Tenants |
Special Structures Telecom Tower Manufacturer
RDS Tower
Features
- 1/4 Space occupied compared to Standard BTS
- Cost 20% less to Supply+Deploy
- 25m, 35m, 45m and 50m models available
- 42m/s + 13m2 & 46m/s + 18m2 Equipment
- Co-location for up to three operators possible
- Securely Enclosed – both Top and Side
- Re-deployable + Movable from one site to another
- Zero Wet Concrete Works – Ballast fill foundation
Tower with Equipment Platform Telecom Tower Manufacturer
Features
- Space – Reduction
- Fence protected – No security required
- Multiple Operator – Provision
- Protection against theft
- Operational cost – Reduction
Camouflaged Palm Tree Telecom Monopole Telecom Tower Manufacturer
Features
- Round face/Polygonal face
- Overlap/Flange connection
- Branch(foliage): composite high strength material branches / 250kmph wind pressure / RF transparent/without steel/anti-UV
- Bark(trunk): epoxy mixed material / vivid and beautiful / elastic / anti-uv / waterproof / fireproof/strong absorbability/long lifespan
- Slip joints/Flange connection
- Painting Optional
TRANSMISSION LINE TOWERS
They offer various products
- Transmission Towers (33KV to 765 KV)
- Sub-station structures (Pipe based and lattice based)
- Cross-arm structures
GALVANIZING DIVISION
- They have setup our new state of the art galvanizing plant, commissioned in February 2020, with a capacity of over 85,000MT per annum. The plant incorporates the best in-class technology, products and practices from across the galvanizing world.
- The Galvanizing plant has a tank size of 13M Length by 1.6M width and a depth on 2.2M. The plant setup is one of the largest galvanizing baths in India. They have 10 process tanks with a size of 13.5M length, 2M width and 2.5M depth.
- They have an MoU with HZL for supply of special high-grade zinc only.
- Inhouse well equipped QC Lab with Spectrometer.
- 16 MT for job work galvanizing delivery is guaranteed in 24 hours
- Under 50MT delivery guaranteed in 48 hours of material receipt
CRASH BARRIER
Applications of Crash Barrier
- Restraining Barriers on Embankments of Expressways & Highways
- Containment Barriers on Medians and Grade Separators on Four/Six Lane Roads
- Protection Barriers/Containment Barriers for Hilly Terrains and Ghat Roads
- Race Car Crash Guards on Car Racing Tracks
- Interior Traffic Safety at Airports, Plants Handling Hazardous Chemicals, Mines, Collieries, Etc
- Fencing Barriers for Country Borderlines, Expanse Lands, Water Bodies, Bridge Piers, Signposts, Rocky Areas, Etc
Types of barriers
Metal crash barriers conforming to all major specification like:
- Ministry of Road Transport & Highways, India (MORTH)
- American (AASHTO M 180)
- Euronorm (EN 1317 – 1&2)
COMPONENTS OF METAL CRASH BARRIERS
W Beams
- Cold roll formed in thickness of 3.00 mm/2.67 mm
- Raw material conforming to IS 5986 Grade: Fe 360 / Fe 410 / Fe 510, IS 10748 Grade II or eqvt
- Hot dip galvanized to 550 gms/sq.m
End specials
- 3 mm/2.67 mm thick turned down end terminals
- 3/2.67 mm thick press formed end terminals (Fish fail)
- 3/2.67 mm U shaped terminals as median end terminals
Fasteners
- M20 and MI6 fasteners as per IS 1367 Grade 4.6/8.8
- Hot dip galvanized
Posts & Spacer
- Cold roll formed in thickness of 5.00 mm/4.2 mm
- Raw material conforming to IS 5986 Grade: Fe 360 / Fe 410, IS 10748 Grade II or eqvt
- Hot dip galvanized to 550 gms/sq.m
Anchorage
- Anchored in ground as per Clause 810
- Anchored in concrete on shoulders (If specified)
- Anchored in concrete with base frame on bridges
Manufacturing Unit
Ganges Internationale Pvt. Ltd
Telecom Tower Manufacturer
No.5A, Karasur Road,
Pondicherry-605 111,
India.
+91-413-2678366
Head Office
Ganges Internationale (P) LTD.,
Telecom Tower Manufacturer
B-37, Lawrence Road Industrial Area,
Delhi-110035, India.
+91-11-47090225/229
contactus@gangesintl.com
You may also be interested in this company:
One thought on “Ganges Internationale”